Moxa MDS-G4020-4XGS-T

Artikelnummer: MDS-G4020-4XGS-T
Kategorie: MDS-G4020-4XGS Series
Hersteller: Moxa

Layer 2 full Gigabit modular managed Ethernet switch with 4 fixed 10GbE SFP+ slots, 4 slots for optional 4-port GE/FE modules, 2 slots for isolated power modules, up to 16 Gigabit Ethernet ports, -40 to 75°C operating temperature

6.112,26 €

exkl. 19% USt. , (Standard)

Muss bestellt werden. Ab Bestellung lieferbar in 28 Tagen.
Lieferzeit: ca. 5 Wochen (DE - Ausland abweichend)

Stk

Beschreibung

MDS-G4020-4XGS-T

MDS-G4020-4XGS Series

Ethernet Interface

Pre-installed Modules
- 4 embedded 10Gigabit ports
Module
- 4 slots for optional 4-port FE/GE modules
Slot Combination
- See the LM-7000H module series datasheet for more information.
  
  Note: The required power module depends on the choice of LM-7000H module. Refer to the following power/module combination requirements.
  
  LM-7000H non-PoE modules:
  Any power module
  
  LM-7000H PoE modules:
  PWR-HV-P48-A, PWR-LV-P48-A only
Standards
- IEEE 802.3 for 10BaseT
  IEEE 802.3u for 100BaseT(X) and 100BaseFX
  IEEE 802.3ab for 1000BaseT(X)
  IEEE 802.3z for 1000BaseX
  IEEE 802.3x for flow control
  IEEE 802.3ad for Port Trunk with LACP
  IEEE 802.1Q for VLAN Tagging
  IEEE 802.1D-2004 for Spanning Tree Protocol
  IEEE 802.1w for Rapid Spanning Tree Protocol
  IEEE 802.1p for Class of Service
  IEEE 802.1X for authentication

Ethernet Software Features

Management
- IPv4/IPv6
  ARP
  Flow control
  Back Pressure Flow Control
  DHCP Server/Client
  DHCP Relay Agent (Option 82)
  Fiber check
  RARP
  LLDP
  Linkup Delay
  Port Mirroring (SPAN, RSPAN)
  SMTP
  SNMP Trap
  SNMP Inform
  SNMPv1/v2c/v3
  RMON
  TFTP
  SFTP
  HTTP
  HTTPS
  Telnet
  Syslog
  Private MIB
Filter
- GMRP
  GVRP
  GARP
  802.1Q VLAN
  IGMP Snooping v1/v2/v3
  IGMP Querier
Redundancy Protocols
- STP
  RSTP
  Turbo Ring v2
  Turbo Chain
  Ring Coupling
  Dual-Homing
  Link Aggregation
  MRP
  MSTP
  Network Loop Protection
Security
- Access control list
  Broadcast storm protection
  DHCP Snooping
  Dynamic ARP Inspection
  IP Source Guard
  Rate Limit
  Trust access control
  Static Port Lock
  MAC Sticky
  HTTPS/SSL
  SSH
  RADIUS
  TACACS+
  Login and Password Policy
  Secure Boot
  MAC Authentication Bypass
Time Management
- SNTP
  IEEE 1588v2 PTP (hardware-based)
  Supported power profiles: IEEE 1588 Default 2008, IEC 61850-9-3-2016, IEEE C37.238-2017
  NTP Server/Client
  NTP Authentication
Protocols
- IPv4/IPv6
  TCP/IP
  UDP
  ICMP
  ARP
  RARP
  TFTP
  DNS
  NTP Client
  DHCP Server
  DHCP Client
  802.1X
  QoS
  HTTPS
  HTTP
  Telnet
  SMTP
  SNMPv1/v2c/v3
  RMON
  Syslog
Industrial Protocols
- EtherNet/IP
  Modbus TCP
MIB
- P-BRIDGE MIB
  Q-BRIDGE MIB
  IEEE8021-SPANNING-TREE-MIB
  IEEE8021-PAE-MIB
  IEEE8023-LAG-MIB
  LLDP-EXT-DOT1-MIB
  LLDP-EXT-DOT3-MIB
  SNMPv2-MIB
  RMON MIB Groups 1, 2, 3, 9
Power Substation
- MMS
  1588 PTP Power Profile IEC 61850-9-3
  1588 PTP Power Profile C37.238-2017

Switch Properties

MAC Table Size
- 16 K
Max. No. of VLANs
- 256
VLAN ID Range
- VID 1 to 4094
IGMP Groups
- 1024
Jumbo Frame Size
- 9.216 KB
Priority Queues
- 8
Packet Buffer Size
- 12 Mbits

LED Interface

LED Indicators
- PWR, EPS, STATE, SYNC, FAULT, MSTR/HEAD, CPLR/TAIL

Serial Interface

Console Port
- RS-232 (RJ45)

USB Interface

USB Connector
- USB Type A

Input/Output Interface

Digital Input Channels
- 1 (On MGMT Module)
Digital Inputs
- +13 to +30 V for state 1
  -30 to +3 V for state 0
  Max. input current: 8 mA
Alarm Contact Channels
- 3 (On MGMT, PWR1, PWR2 Module)
  Relay output with current carrying capacity of 2 A @ 30 VDC
Buttons
- Reset button

Power Parameters

Input Voltage
- With PWR-HV-P48–A installed:
  110/220 VDC, 110 VAC, 60 HZ, 220 VAC, 50 Hz, PoE: 48 VDC
  
  With PWR-LV-P48–A installed:
  24/48 VDC, PoE: 48 VDC
  
  With PWR-HV-NP installed
  110/220 VDC, 110 VAC, 60 HZ, 220 VAC, 50 Hz
  
  With PWR-LV-NP installed:
  24/48 VDC
Operating Voltage
- With PWR-HV-P48–A installed:
  88 to 300 VDC, 90 to 264 VAC, 47 to 63 Hz, PoE: 46 to 57 VDC
  
  With PWR-LV-P48–A installed:
  18 to 72 VDC, PoE: 46 to 57 VDC
  
  With PWR-HV-NP installed:
  88 to 300 VDC, 90 to 264 VAC, 47 to 63 Hz
  
  With PWR-LV-NP installed:
  18 to 72 VDC
Input Current
- With PWR-HV-P48–A/PWR-HV-NP installed:
  Max. 0.38 A @ 110 VDC
  Max. 0.20 A @ 220 VDC
  Max. 0.75 A @ 110 VAC
  Max. 0.48 A @ 220 VAC
  
  With PWR-LV-P48–A/PWR-LV-NP installed:
  Max. 1.9 A @ 24 VDC
  Max. 0.95 A @ 48 VDC
Power Consumption (Max.)
- With PWR-HV-P48-A/PWR-HV-NP:
  Max. 41.8 W @ 110 VDC
  Max. 44.2 W @ 220 VDC
  Max. 46.6 W @ 110 VAC
  Max. 46.5 W @ 220 VAC
  
  With PWR-LV-P48-A/PWR-LV-NP:
  Max. 45.8 W @ 24 VDC
  Max. 45.8 W @ 48 VDC
  
  Note: These are the maximum power consumption ratings for the device with the maximum number of modules installed.
Overload Current Protection
- Supported
Reverse Polarity Protection
- Supported
Max. PoE Power Output per Port
- 36 W
Total PoE Power Budget
- Max. 360 W (with one power supply) for total PD consumption at 48 VDC input for PoE systems
  
  Max. 360 W (with one power supply) for total PD consumption at 53 to 57 VDC input for PoE+ systems
  
  Max. 720 W (with two power supplies) for total PD consumption at 48 VDC input for PoE systems
  
  Max. 720 W (with two power supplies) for total PD consumption at 53 to 57 VDC input for PoE+ systems

Physical Characteristics

IP Rating
- IP40
Dimensions
- 239 x 115 x 163.25 mm (9.41 x 4.53 x 6.43 in)
  254 x 115 x 163.25 mm (10 x 4.53 x 6.43 in) with dual PWR-HV-P48-A/PWR-LV-P48-A power modules installed
Weight
- 3,400 g (7.50 lb)
Installation
- DIN-rail mounting
  Wall mounting (with optional kit)
  Rack mounting (with optional kit)

Environmental Limits

Operating Temperature
- -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
- 5 to 95% (non-condensing)

Standards and Certifications

Safety
- EN IEC 62368-1
  IEC 62368-1
  UL 62368-1
  IEC 60950-1
  UL 61010-2-201
  EN 61010-2-201
EMC
- EN 55032/35
  EN 61000-6-2/-6-4
EMI
- CISPR 32, FCC Part 15B Class A
EMS
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
  IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
  IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
  IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
  IEC 61000-4-6 CS: 10 V
  IEC 61000-4-8 PFMF
  IEC 61000-4-11 Voltage Dips & Interruptions
Railway
- EN 50121-4
Traffic Control
- NEMA TS2
Shock
- IEC 60068-2-27
Freefall
- IEC 60068-2-31
Vibration
- IEC 60068-2-6
Power Substation
- IEC 61850-3
  IEEE 1613

MTBF

Time
- 794,302 hrs
Standards
- Telcordia SR332

Warranty

Warranty Period
- 5 years
Details
- See www.moxa.com/warranty